Skip to main content

Bulova 1954 Clipper

8/10 votes
Model ID rating explained.

Manufacture Year: 


Movement Model: 

10 csc

Movement Jewels: 


Movement Serial No.: 


Case Serial No.: 


Case shape: 


Additional Information

I came across a different dial, not sure if its the propper one for 1954, but it fit and looks good.

Not For Sale
Bulova watch clipper
Bulova watch
Bulova watch
timerestoration's picture
Posted June 19, 2012 - 9:14am

Not sure about the dial... should say SELFWINDING?

Posted June 19, 2012 - 10:13am

Jeff is right, the dial should have self-winding printed on it, also the markers a different than the 1953 Clipper that I have with a 10CSC movement. The back of the case should say water tite and self-winding on it.

Pictures of the back and movement will be needed to confirm.

Posted July 14, 2012 - 11:56am

thank you for the information, the dial seem to be re-done the back says water tite and self-winding , shock resistant & anti magnetic on it, L4 serial # 7397973

bobbee's picture
Posted July 14, 2012 - 1:36pm

Dial is identical to 1954 "unknown", posted by Jim Townsend. Possible newer dial variant.

Posted July 14, 2012 - 2:22pm

@ bobbe you are right it seems to be the same dial. still not sure if it is the correct one.

William Smith's picture
William Smith
Club 5000Panel Member
Posted July 14, 2012 - 6:43pm

Tentative from me for now... 2 ticks  Zappatore, can you confirm the movement model (caliber) for the watch?  Please  ...and thanks for entering a "?" in that field while it remains unknown. Nice watch. 

bobbee's picture
Posted July 14, 2012 - 8:27pm

Even though the dial is slightly different, still a Clipper for me, as long as the movement is correct.

shelton243's picture
Posted June 20, 2016 - 9:38am

I have simular watches in various years (1952-57) and sizes that have that Identical dial.  I have one posted with a sunburst that had that dial,  had to change it out due to its condition.  

shelton243's picture
Posted June 20, 2016 - 9:41am

I have a 52 like yours with the same movement but it reads  L2.    I can't read the movement, is it L4 ?

Posted August 20, 2016 - 7:03am

does anyone know the part number for the ruber gasket ? i kow the one that is in there is wrong, condensation gets in the dial from wrist sweat, 

thank you for any help.